Victor X300
With a rotary table embedded inside a 3.5 meter long fixed table, Victor
Taichung Machinery launches its new model, Vcenter-X300. The machine
is equipped with a swivel head on the traveling column to implement
5-axis simultaneous machining at any angle for a part’s diameter
With in 1100mm. The 3.5-meter work table may be split in two by
In stalling the partition plate in the middle; functioning as a twin pallet machine. With the rotary table and the swivel head, the machine may perform 4 or 5 axes simultaneous cutting. Innovative C-axis Direct Drive
rotary table design shortens headstock’s overhang distance, hence assuring
rigidity and even allowing a Ф1100mm work piece to be machined in 700mm.
Y-axis stroke. Swivel head (B-axis) is composed by roller gear mechanism and
coupling to clamp the built-in spindle (rated 22W/12000rpm with base speed
1060rpm) at every 1 degree resolution. The 5-axis simultaneous machining is
powered by Fanuc® controller 31i-B5, featuring easy programming and tool
calibration. |
